Choosing the Optimal Patch Size with GlideWear or ShearBan

Whether you’re trying ShearBan (self-adhesive PTFE sheets & patches) or GlideWear Prosthetic Liner Patches (2-ply silk-like shear reducing fabric) for the first time or are looking to optimize your patch size and placement for maximum performance and cost savings, SIZE does matter. This post serves to provide guidance and considerations in choosing the correct patch size for your individual need.

New from Tamarack Habilitation Technologies, the GlideWear Prosthetic Liner Patch is indicated for lower limb amputees who experience discomfort or skin breakdown on their residual limb due to interface pressure and shear between the socket, liner, and skin.

The GlideWear Prosthetic Liner Patch is currently available in two sizes:

Small (standard) – measuring 2.5 inch x 4.75 inch (6 cm x 12 cm)GlideWear Prosthetic Liner Patch

Large – measuring 4.5 inch x 7.5 inch (11 cm x 19 cm)

In choosing the correct size for you or your client’s needs, consider starting with the small size, which is optimal in MOST applications. Whether you’re using the GlideWear Prosthetic Liner Patch to relieve or prevent discomfort and skin breakdown on the patalla, popliteal, distal anterior tibia, or fibular head, we only recommend using a patch that’s slightly larger than the area of concern.

If the small patch provides insufficient coverage due to limb size/volume or wound size, only then do we recommend selecting the larger patch size. Wrinkling is also reduced or eliminated when patch size is optimized and not exceeding the size of the limb.

Keep in mind that prosthetic liners are used for suspension, so the least amount of spot reduction of “hot spots” or pressure areas is the goal. 


 

060811_1815_PodiatristE3.jpg

ShearBan, another friction & shear interface technology from Tamarack, is also intended to provide friction & shear reduction in areas of concern and not throughout the entire device. Because ShearBan’s ultra-slick PTFE surface is slippery as ice, the material should be used to spot relieve friction & shear wherever hot spots, blisters, ulceration, or callusing appears.

ShearBan is available in 8 inch x 12 inch sheets for custom trimming as well as 1.75 in x 2.75 inch oval patches for easy placement on footwear, insoles, and medical devices.

For more information about GlideWear and ShearBan, visit www.tamarackhti.com.

GlideWear and ShearBan are manufactured in Minneapolis, Minnesota, U.S.A. by Tamarack Habilitation Technologies, Inc. Contact us with questions or feedback!

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s